======================================================================= Stealth 3D 2000 Series README.TXT ======================================================================= Release Notes ------------- This is v2.03 of the Stealth 3D 2000 Series Windows NT 4.0 drivers. Installation Notes ------------------ You must have Windows NT 4.0 installed with the Standard VGA driver (640x480x16) before you install the Diamond Stealth 3D 2000 Series NT drivers. If you are running a different graphics mode please re-configure for Standard VGA. Installation Instructions ------------------------- 1. Once you have confirmed that you are running in Standard VGA, place the Stealth 3D 2000 Series Windows NT Driver Diskette into the floppy drive. 2. Open the Windows NT Control Panel. 3. Select the Display icon. 4. Select the Settings tab. 5. Select Display Type. 6. Select Change. 7. Select Have Disk. 8. Confirm that the Driver Diskette is in A: (or you can change the drive letter if the driver diskette is in another drive) and select OK. 9. You will now be presented with a list of driver entries. Select: Diamond Multimedia Systems, Inc. Stealth 3D 2000 Series 10. Select OK. 11. A "Third-party Drivers" dialog box will appear, select Yes to proceed. 12. A "Installing Driver" dialog box will appear confirming that the driver has been successfully installed, select OK. 13. Select Close. 14. Select Close. 15. A "System Settings Change" dialog box will appear, select Yes to restart the computer. You need to restart Windows NT 4.0 for the changes to take place. Note that the default resolution that installed is 640x480x8 60Hz. From this point on, you can change your resolution/color depth by using the Display Icon in the Control Panel. Select the "List All Modes" button. This will display all resolutions and refresh rates available. Please use the Test option so that you can confirm that the selected refresh rate and resolution is supported by your monitor. Features Added -------------- MCD feature added. Problems Addressed ------------------ None. Known Limitations ----------------- - MCD feature not supported in 16-bit mode. - No overlay support in 24-bit mode. - In some modes, you may experience a problem while shelling to a full screen DOS session during video playback. Contacting DIAMOND ------------------ Diamond can be reached through a number of ways: DIAMOND - U.S.A. ---------------- Postal Service : Diamond Multimedia Systems, Inc. 2880 Junction Avenue San Jose, CA 95134 Voice (Main) : (408) 325-7000 Voice (TechSppt): (408) 325-7100 [M-F 5-7; Sat 8-4 Pacific] FAX (Main) : (408) 325-7070 FAX (TechSppt) : (408) 325-7171 BBS (to 14400) : (408) 325-7080 BBS (to 28800) : (408) 325-7175 WWW : http://www.diamondmm.com FTP : ftp://ftp.diamondmm.com e-mail : techsupt@diamondmm.com DIAMOND - Europe ---------------- Postal Service : SPEA Software GmbH, a Diamond Multimedia Company Moosstr.18b 82319 Starnberg, Germany Voice (Main) : +49-8151-2660 (Germany) : +44-1189-44440 (UK) Voice (TechSppt): +49-8151-266 330 (Germany) : +44-1189-4444 44 (UK/English) : +44-1189-4444 33 (UK/French) FAX (Support) : +49-8151-266 331 (Germany) BBS (to 28800) : +49-8151-266 333 (Germany) : +44-1189-4444 15 (UK) BBS (ISDN, x.75): +49-8151-266 334 (Germany) CompuServe : GO SPEA WWW : http://www.spea.com All product names listed are trademarks or copyrights of their respective owners. ======================================================================= Diamond Multimedia Systems, Inc. (c) 1993-97, All Rights Reserved =======================================================================